The iPhone Elite Dev Team has released anySIM v1.2.1u. If you have the technical-savvy skills to downgrade, prepare the jailbreak, and everything else involved with the process of bringing your hacked iPhone up to date — then have at’er.
anySIM 1.2.1u Precautions:
- This version works only with 4.02.13_G baseband version and can be run on 1.0.2, 1.1.1 or 1.1.2 jailbroken systems.
- The only way your baseband will be 4.02.13_G while you’re running 1.0.2 or 1.1.1 is if you updated then downgraded firmware.
- If your iPhone came with 4.02.13_G (aka 1.1.2) OUT OF THE BOX then do NOT use this unlock yet.
- It hasn’t been tested with bootloaders other than BOOT03.09_M3S2
- Some very new U.K. iPhones come out of the box with BOOT04.06_M3S2.
- If you’re in doubt, check the output of bbupdater -v or go into minicom and issue at+xgendata
So with that in mind, use this software at your own risk. Good luck!
Download: anySIM 1.2.1u
- source: iphone-elite
hi
i had iphone 1.1.1 jailbroken,i update to 1.1.2.i used oktprep from tweeks 1.1.1 and ok…then i downgrade to 1.1.1 again but i still have the new modem firmware 4.02.13g…and now i am using the anySIM 1.2.1u but it doesnt work !!
WHY ? can anyone help me ??
what i am doing wrong ?
hi…. i had iphone 1.1.1 and modem firmware 4.02.13_G…i put the anySIM 1.2.1u to the folder inside application and i saw the anySim after i restart iphone but i just cant scroll the “slide to unlock” key at the bottom… can anyone help me?? did i do something wrong?
Hi - how do you copy the anySIM1.2.1u to your iphone? i can’t get it to work
You need to make anySIM executable.
Hi guys, thanks for your help.
i have an iphone with 1.1.2 OTB, what can i do?
how can i get it working?
Hello Duppy. Currently there is nothing you can do until these newly shipped 1.1.2 iPhones get into the hands of the Dev Team or other hackers/testers. If you read above, the bootloader revision is too new in the 1.1.2 factory iPhones.
Don’t worry — it’s just a matter of the new bootloader being tested and a new & tested anysim will appear. I say a week tops.
-elc.
hi! i had iphone 04.02.13_G, i don’t hack it, what can i do? i don’t know
pLease help me:((((
i from turkey..
any news on the 1.1.2 unlocking for OTB phones. i purchased one and i’d really like to unlock it so i can use it. any news??
Hi I hope they unlock the new iphone, *1.1.2* how long do you think is going to take? I have it as an ipod touch so far.
I´ve got a huge Problem: I was running AnySim 1.2 for 4.02.13G with my downgraded 1.1.1 iPhone from America but i had the original Sim Card from America inside instead of mine (german O2).
AnySim ended with success, but my SimCard doesn´t work. When I start AnySim again, then AnySim allways crashes
I bought new box of apple iphone from apple… it had 112 verison with 04.02.13_G, Can I unlock the phone?
not at the moment Shadow …
Just wait a bit longer…
iv got the same issue..
Hi, I need to find a install.app file. I only can find the new beta version =(
I found a link but this install.app doesnt work on my iPhone!
Can somebody poste me a link to an old install.app Zipfile?
I’m another otb 112 buyer waiting for a fix. Is there an expected arrival on this? Is someone actually working on it?
any new on unlocking the 1.1.2 yet? so wahts the progress? when will they figure it out?
hey can you help me,, ok so i have an iphone (1.0.2 with 04.02.13_G) i put anysim 1.2 on my iphone put a t-mobile sim card inside like it said to do then ran it.. at the end it said “unlock succesful”. then when i restarted my phone it says incorrect sim and i dont get service, every thing ells still works fine just not the phone,, could you please tell me if i am doing something wrong.. thx
was your iphone originally 1.1.2? because i believe that the 04.02.13 firmware cannot be unlocked yet. I heard that 1.1.3 is coming out soon, so does that mean the unlock for 1.1.2 is near?
If 113 is about to be released, does that mean that people are going to give up developing a jailbreak/unlock solution for 112?
bought a new Iphone with v 1.1.2 firmware can it be unlocked to be used w/ any GSM carrier ? or do i stil have to wait a bit ?
Hi fellow Iphoners! I bought iPHone 1.1.2 OTB two days ago . I jailbroke it and it is working without simcard and i can download applications from iBrickr. I downloaded anSim 1.2 from iBrickr. It did some step about unlocking Sim. But at the end it wrote that my iPhone is already patched and it asked me to reboot my iPhone. When i changed simcard it didn’t work. So do you have any suggestion abou that? Sorry for my bad Englishh :)) Thanks for help
I’ve got 1.1.2 OTB and I’m worried this fix doesn’t seem to be on its way…I mean people have been awaiting its arrival since november and last i heard it was supposed to be out by the 10th but nothing…someone please give me a definitive date or some hope or else i’m gonna have to cut my losses and buy an old firmware version from ebay… this is getting ridiculous…
hi! im frustrated i have an iphone 1.1.1 , 04.01.13_g i unlocked it with anysim at the end it shows unlock succesfull but when I put in tmobile sim it still shows no service can anyone help me
hi is the software for iphone 112 otb out yet because mine is in that version. hiks hiks so sad i cant use it
Somebody (I don’t know who?) is cracking 1.1.2 OTB iPhones with something they called TurboSIM… The problem is the thing is SOLD OUT in all the known places like eBay Amazon … everywhere !!! Give it a shot And if you find it!!! Spread the word (Im a frustated OTB 1.1.2 iPhone owner) MEX 19/12/2007
I just got Iphone OTB 1.1.1.2 . now using it as IPOD touch .I m from Singapore.Hope anyone can manage to unlock the phone usage.
Im pissed off
i had this iphone in my room for 3days and cant use it i been looking all over the place for unlock anySIM only place thats is sed to unlock v1.1.2 will be released before the New Year, the hardware is currently being mass produced in China.
take a look dudes
http://www.iphoneunlockuk.com/?gclid=CIm6tOnLwZACFUaPOAodA0vFYA
good afternoon iPhone users specially 112 otb owners… It seams that the unlock for 112 OTB is not coming out and I was just thinking about the money I spend in this iPhone and the pros and cons if I keep it or not so… Im going to sell it!! :(
help. my iPhone was previously unlocked as v1.1.1 and like a idiot i upgraded to v1.1.2 through iTunes. Now it is locked again and in Activate iPhone mode. i tried to downgrade back to 1.1.1 but it fails. any sugguestions please!
dont worry can be to fixed look on youtube. to all that have v1.1.2 oob i have found a place that unlock v1.1.2 im going to go get it done on the 3rd Jan but will cost me £100 with a turbosim.
please help me to unlock iphone 04.02.13 g
serial no.857474grwh8
model no.A1203
assembled in china
HI!I bought an IPHONE v.1.1.2, week 49, 4.02.13_G, but I don´t have my IPHONE BOX anymore!!!!So how could I know if it is 4.02.13_G (aka 1.1.2) or NOT? Can anybody help me?
I just wanna use it as an ITOUCH at least, while I´m waiting for the UNLOCKING COMUNITY works…
thanks and awaiting some help down here…
i bought an iphone on 21 JAN 2008 .. the serial no. indicates 52 weeks ..
i checked the version which showed 04.02.13_G - does this mean that it carries 1.1.2 ?? or may be apple store upgraded the phone to 1.1.3 and sold it ??
please advise how to unlock using stealthsim ??
04.02.13_g is the 1.1.2 version soo its downgrade to 1.1.1 jailbreak uppgrade and unlock with some hardwaresim ex stealth or i use turbo for example..
http://WWW.iclarified.com every thing you need 2 know,,,
i would like to have pcsuit software