iPhone Hacks · Hacks, Cracks, Mods, Homebrew, Utilities

The highly talented iPhone Dev Team — the crew responsible for this improved 1.1.2 jailbreak — have released a “better” method to aid in freeing your iPhone. Better than this one; that is. Although the procedure has been polished, it doesn’t necessarily rid the complication factor. You still require some technical know-how and patience. Personally, I recommend sticking with 1.1.1.

Download: iPhone 1.1.2 Jailbreak

Donate to Conceited Software…

The 23-step guide (Courtesy of iPhone Atlas):

1. Download the iPhone 1.1.1 firmware/software package, and after it is downloaded, make sure it still has the extension .ipsw and not .zip. Rename it if necessary (the correct name is iPhone1,1_1.1.1_3A109a_Restore.ipsw).
2. Put iPhone in recovery mode (hold the sleep and home [on the top of the iPhone] buttons simultaneously until the screen goes blank, then release the sleep button but keep holding the home button until a screen showing an iTunes icon and a USB cable appears).
3. Launch iTunes if it isn’t open. You will receive a message that says “iTunes has detected an iPhone in recovery mode”
4. Do not restore the iPhone at this point
5. In iTunes, select your iPhone from the left-hand pane (source list) and click the “Summary” tab. Hold down the option key, then click “Restore.” Select the 1.1.1 package you just downloaded. You’ll receive the error message “1015″ indicating a failure to restore — this is normal.
6. Download the iTunes 1.1.2 jailbreak folder from Conceited Software.
7. If you are using a Mac, double-click jailbreak.jar in the file you just downloaded. If you are on a Windows system, double-click the file windows.bat. Click the “Boot from Recovery” button. This should force the iPhone out of recovery mode.
8. This process can take several minutes or can be instant. In some cases, the phone will automatically reboot and go to the “Activate iPhone” screen. In other cases, the progress bar never finishes, but the proper process occurs, and the iPhone screen goes completely black with the device powering off. At this point, you might need to hold down the power button for several seconds until the device restarts. If 10 or minutes have gone by and nothing has happened (the recovery mode screen, with an iTunes icon and a USB cable, is still displayed on your iPhone), try disconnecting your iPhone and reconnecting it and trying again, or restart your computer and trying again.
9. Launch iTunes if it is not open. You will no see the “Waiting for Activation” screen, but your iPhone won’t activate.
10. Slide to unlock your iPhone, and launch Safari.
11. Navigate to www.jailbreakme.com.
12. Go to the bottom of the page and tap “Install AppSnapp.”
13. You will see the “Downloading Programs” message and a spinning progress indicator.
14. At the end of the process, your iPhone will be jailbroken under firmware version 1.1.1, but you won’t have access to voice services yet.
15. Slide to unlock your iPhone. You will see the “Installer” icon on your home screen. Tap it.
16. Tap “Install” at the bottom of the screen, then tap “Tweaks 1.1.1″
17. Scroll down to a package called “OktoPrep” and tap it, then tap the “Install” button in the upper-right corner.
18. In iTunes, select your iPhone from the source lift on the left-hand side. If it prompts you to restore your iPhone from backup, you can do so (by pressing the “Continue” button), after which your iPhone will reboot and again try (and fail) to activate.
19. With your iPhone selected on the left-hand pane, click the “Summary” button a the top of the window. You will see a message stating “A newer version of the iPhone software is available (1.1.2). […]” Click the Update button (not Restore). Your iPhone should receive the 1.1.2 update, and eventually activate in iTunes.
20. [At the end of the process, you might see an error message indicating that the iPhone could not be restored because of an “Error 1602″ or similar. If so, follow the instructions in this Knowledge Base article to re-install iTunes. You then, unfortunately, have to start the process all over again.]
21. After the installation of firmware 1.1.2, Installer will vanish from your iPhone — this is normal.
22. Go back to the folder you downloaded from Conceited Software and again run the jailbreak.jar file on a Mac or the windows.bat file on a Windows system. This time, check the “Install SSH option” then press the “Jailbreak” button. This process takes several minutes — do not perform any other operations on your iPhone during this process.

23. Your iPhone will reboot several times. When you’re done, the Installer application should now be on your screen and the iPhone should properly activate. Consult our Applications page for information on using Installer.

- source: iPhone Atlas