home
August 21, 2008
Posted by Noskire

The iPhone Dev Team have released an updated version of QuickPwn for Windows. It contains the Dev Team’s new bundles for 2.0.2 and have added support for devices running version 2.0 which means the device can be running 2.0, 2.0.1 or 2.0.2.

Here is the updated QuickPwn for Windows, wrapped by Poorlad’s GUI. It contains our new bundles for 2.0.2 and we’ve added support for version 2.0 devices which means the device can be running 2.0, 2.0.1 or 2.0.2. Remember this is still beta software, so usual rules apply, no complaints if anything goes wrong and use the tool at at your own risk!

In addition, the Mac GUI guys on the team are working on a GUI version of Quickpwn for Mac OS X.

The Mac GUI whizzes in the team are working on a graphical Mac OS X version of QuickPwn and also some nice little tweaks to the next release of PwnageTool. As soon as these are finished and tested, we’ll let you know, but don’t hold your breath and refresh for these, the release is not imminent

Please remember that QuickPwn is still in beta so use it at your own risk!

We have it in our iPhone Downloads section in ‘Utitlities’::’Windows’ or follow this direct link Download QuickPwn GUI 1.2.0

(more…)

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb

July 15, 2008
Posted by Alias420

A few new videos have surfaced today. First we have the video of an unlocked iPhone 3G, this isn’t the software unlock that we’re all anxiously awaiting. It requires the use of a SIM adapter much like the Hyper-card or Turbo SIM methods used on the first generation iPhone.

Second up we’ve got another video released by the iPhone Dev Team showing a fully jailbroken iPhone 3G.

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
July 14, 2008
Posted by Alias420

We’ve been getting quite a bit of mail about this lately, most of you probably didn’t jump the gun and install iTunes 7.7 but some of you did.

So you didn’t listen to our warnings about upgrading your lowly 2G/EDGE iPhone to v2.0 firmware and installing iTunes 7.7, now your phone is relocked and you have a really expensive iPod touch because you can’t make any phone calls.

Well everything you require to get your phone back is already available right here from our iPhone downloads section. Here is what you need:

First you’ll need to uninstall iTunes 7.7 then install iTunes 7.6.2 which we have for you here: Windows / Mac

You shouldn’t need to download it serpately but here is our link to iPhone Firmware v1.1.4

All you need to do is use iTunes to perform a full recovery and it will nicely downgrade your iPhone for you. Just turn off the phone plug it into your computer then press and hold both the power and home buttons for 10 sec, it will beep you can let go of the power but keep holding the home button down until iTunes has discovered the phone in restore mode.

Update: if you are having problems with a newer iPhone you may need to downgrade the baseband firmware. You can use a modded version of ZiPhone by kIREmk to achieve this available here: Windows / Mac

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb

April 14, 2008
Posted by greg

The iPhone DEV Team has released PwnageTool v1.1 for Mac OS X –

Changes and fixes:

  • EDGE settings fix for iPhone 1.1.4 firmware
  • Phone/iPod firmware 2.0 5A240d support

New Features:

  • Added custom package support
  • Added custom logo support
  • Added auto delete of BootNeuter.app

…you know what it’s all about. And if ya don’t know, ya won’t know.

Download: PwnageTool v1.1 (Mac)

- source: wikee.iphwn.org

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
April 8, 2008
Posted by greg

Oops — I had original intentions of posting this yesterday; but, well, long story short — I forgot. So without further ado, iPlusPWNS presents iLiberty+ 1.51 for Mac and iLiberty+ 1.3 for Windows.

iLiberty+ 1.51 Screenshot

Download:
iLiberty+ 1.51 (Mac)
iLiberty+ 1.3 (Windows)

- source: ipluspwns.com

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb

April 3, 2008
Posted by greg

It’s here — iPhone DevTeam’s Pwnage…

Pwnage Screenshot

Mac OS X features:

  • iPwner: Pwns your iPhone, the safer jailbreak
  • IPSW Builder: Lets you create custom firmware to load to you pwnd phone including unlocking, neutering, custom pictures, activation, and bootloader upgrade/downgrade.
  • Bootneuter: A neutered bootloader survives iTunes updates, even updates to 1.2.0 (aka 2.0). Unlike unlocking which requires a new patch for each firmware version, you only need to neuter once.

The “DevTeam” would like to announce the release of the OS X version of the PwnageTool application.

The team (and especially Wizdaz) have been working hard to bring you this release in as short a time as possible.

The plan (4 weeks ago) was to release a Mac tool only. This was decided because of the lack of reliable Mac filesystem tools on Windows, and the fact that the task of porting them would be too time consuming.

With that in mind the genius that is “cmw” stepped up to the plate and offered his services to the DevTeam. He proposed to provide a tool that would give the same functionality and User Interface as the Mac tool.

cmw has done an almost unthinkable task and ported the almost complete Pwnage Tool to Windows in a little under a week, and we would like to thank him for this unbelievable work. He is currently in the final test stages and hopefully this should be finished within the next 24 hours (but even he needs sleep and family time occasionally!) We’ll post a link as soon as the testing has finished.

cmw’s site is at http://www.iphonelinux.org

The Mac tool is available at http://www.iphone-dev.org

Download: PwnageTool 1.0 (Mac)

- source and how-to articles: wikee.iphwn.org

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
March 30, 2008
Posted by greg

Zibri has released ZiPhone version 3.0; the tool that does it all and now even more… Utilizing ZiPhone’s new plugin system (see PLUGIN_HOWTO.TXT) you may trigger user specific actions or events after the jailbreak operation, or when executing “ziphone –P”.

ZiPhone 3.0 changes:

  • No more need of fix nvram
  • Solution for GREYED wifi
  • No need for YouTube Fixes
  • Embedded apps installer
  • Customized plugins

Download:
ZiPhone 3.0 (Windows)
ZiPhone 3.0 (Mac)

- source: ziphone.org

Thanks, son of Erik the Red.

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
March 19, 2008
Posted by greg

Zibri’s rockin’ a new version of ZiPhone…

Current ZiPhone users:

iPhone owners — you have no *real* reason to upgrade. Boys & girls sporting the iPod Touch — you want this version; it clears/fixes the NVRAM issue. Download, click on CLEAR/FIX NVRAM, then after reboot, jailbreak that bad boy (or girl).

New ZiPhone users:

If you’re looking for a simple software solution to activate, jailbreak, and unlock your iPhone/iPod Touch — download ZiPhone right now. It doesn’t get much easier than this.

Download:
ZiPhone 2.6b (Windows)
ZiPhone 2.6b (Mac)

- source: ziphone.org

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
March 17, 2008
Posted by greg

Courtesy of NerveGas, planetbeing, ghost_000, dinopio, bgm, MuscleNerd, the iPhone-Elite and iPhone/iTouch Dev teams…

The dev team has been using dual-booting to jailbreak the iPhone for several months now, however now that several more advanced techniques have been developed (many of which are still private), I thought it apropos to release this cool hack for those who would like to dual boot multiple versions of the iPhone software (or other OS’s) from their handset. It’s a neat little hack that I think might be useful for developers playing with 1.2, which appears to disable the radio (phone calls).

Cool hack indeed. It’s somewhat of a complex process requiring technical know-how. If you’re unfamiliar or uncomfortable with command line, don’t bother attempting this. Otherwise — go nuts!

Kudos team.

iPhone Dual Boot Howto

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb
March 14, 2008
Posted by greg

Introducing a new software package for downgrading the boot loader, bypassing activation, performing a successful jailbreak, and finally SIM unlocking your iPhone on system software 1.1.4 — that is Aviegas’ iPlus 2.0b. Fully automatic and all that; Windows and Mac (Intel/PPC).

Leif has shared two tutorials — both for Windows and Mac OS X — those courtesy of hackthatphone.com. Enjoy!

Download: iPlus 2.0b

- source: ipluspwns.com

Share and Enjoy:
  • Facebook
  • Twitter
  • Digg
  • Slashdot
  • del.icio.us
  • Reddit
  • Technorati
  • Mixx
  • NewsVine
  • Propeller
  • TwitThis
  • YahooMyWeb


Recent Posts

Poster: rockhead

Sat Jul 04, 2009 12:41 pm


Poster: wookieturd

Sat Jul 04, 2009 9:35 am


Poster: Franny

Sat Jul 04, 2009 9:15 am


Poster: Franny

Sat Jul 04, 2009 9:11 am


Poster: Fuzzygod

Sat Jul 04, 2009 7:49 am


Poster: fuji0000

Sat Jul 04, 2009 6:51 am


Poster: xtn5021

Sat Jul 04, 2009 4:55 am


Poster: wookieturd

Sat Jul 04, 2009 2:08 am


Poster: Fuzzygod

Sat Jul 04, 2009 12:05 am


Poster: Pcmaker

Fri Jul 03, 2009 9:04 pm